zabbix-jira

zabbix-jira is python module that allows you to create tasks in Jira with grafs by the trigger from Zabbix.

Requirements:

• python >= 2.7
• python libs: requests, jira
  
  

Installation:

• Copy this repo to your zabbix-server: git clone OSidorenkov/zabbix-jira.git
• Copy jirabix.py to your Zabbix AlertScriptsPath directory (see your zabbix_server.conf)
• Create and configure config.py near jirabix.py. You can take as an example config.py.example from repo.
• Install python libs: pip install requirements.txt
  
  

Configuration:

• Create new media type in Zabbix:
  
  

If you use Zabbix 3.0 and higher, add this parameters:

{ALERT.SENDTO}{ALERT.SUBJECT}{ALERT.MESSAGE}

• Add this media to your read user in Zabbix
  
  

Add in "Send to" field jira username (see the profile user in Jira)

• Configure your Actions:
  
  

Example message:

Last value:{ITEM.VALUE1} ({TIME})zbx;graphszbx;graphs_period=1800zbx;itemid:{ITEM.ID1}zbx;triggerid:{TRIGGER.ID}zbx;title:{HOST.HOST} - {TRIGGER.NAME}zbx;priority:{TRIGGER.SEVERITY}Server: {HOSTNAME} ({HOST.IP})Desc:{TRIGGER.DESCRIPTION}

Example recovery message:

Server: {HOSTNAME} ({HOST.IP})zbx;triggerid:{TRIGGER.ID}zbx;ok:1Description:Problem resolved!Time of resolved problem: {DATE} {TIME}Annotationszbx;graphs -- enables attached graphszbx;graphs_period=10800 -- set graphs period (default - 3600 seconds)zbx;graphs_width=700 -- set graphs width (default - 900px)zbx;graphs_height=300 -- set graphs height (default - 300px)zbx;itemid:{ITEM.ID1} -- define itemid (from trigger) for attachzbx;title:{HOST.HOST} - {TRIGGER.NAME} -- graph titlezbx;triggerid:{TRIGGER.ID} -- define triggerid to link problem and recovery of eventzbx;priority:{TRIGGER.SEVERITY} -- set priority task like as priority of trigger from Zabbixzbx;ok:1 -- use this parameter only in RECOVERY message, if you don't want create a new task about recovery in Jira

You can use Jira format text in your actions: https://jira. /secure/WikiRendererHelpAction.jspa?section=all

Test script

You can use the following command to create a ticket in Jira from your command line:
python jirabix.py "jira_username" "ticket_subject" "ticket_desc" where

• jira_username - username from Jira user profile
• For ticket_subject and ticket_desc you may use "test" "test"
  
  
  • If you want to test real text from zabbix action message copy test/entry.txt from repo and change the contents of the file on your real data and change jirabix.py like this:
    
    And run:
    python jirabix.py "jira_username" "ticket_subject
    
    

Result

• See how creates the ticket with graf from Zabbix:
  
  

• When problem is going to OK, script convert the ticket to "Done" status with comment from zabbix recovery message:
  
  

原创：成小编

zabbix-jira

zabbix-jira is python module that allows you to create tasks in Jira with grafs by the trigger from Zabbix.

Requirements:

• python >= 2.7
• python libs: requests, jira
  
  

Installation:

• Copy this repo to your zabbix-server: git clone OSidorenkov/zabbix-jira.git
• Copy jirabix.py to your Zabbix AlertScriptsPath directory (see your zabbix_server.conf)
• Create and configure config.py near jirabix.py. You can take as an example config.py.example from repo.
• Install python libs: pip install requirements.txt
  
  

Configuration:

• Create new media type in Zabbix:
  
  

If you use Zabbix 3.0 and higher, add this parameters:

{ALERT.SENDTO}{ALERT.SUBJECT}{ALERT.MESSAGE}

• Add this media to your read user in Zabbix
  
  

Add in "Send to" field jira username (see the profile user in Jira)

• Configure your Actions:
  
  

Example message:

Last value:{ITEM.VALUE1} ({TIME})zbx;graphszbx;graphs_period=1800zbx;itemid:{ITEM.ID1}zbx;triggerid:{TRIGGER.ID}zbx;title:{HOST.HOST} - {TRIGGER.NAME}zbx;priority:{TRIGGER.SEVERITY}Server: {HOSTNAME} ({HOST.IP})Desc:{TRIGGER.DESCRIPTION}

Example recovery message:

Server: {HOSTNAME} ({HOST.IP})zbx;triggerid:{TRIGGER.ID}zbx;ok:1Description:Problem resolved!Time of resolved problem: {DATE} {TIME}Annotationszbx;graphs -- enables attached graphszbx;graphs_period=10800 -- set graphs period (default - 3600 seconds)zbx;graphs_width=700 -- set graphs width (default - 900px)zbx;graphs_height=300 -- set graphs height (default - 300px)zbx;itemid:{ITEM.ID1} -- define itemid (from trigger) for attachzbx;title:{HOST.HOST} - {TRIGGER.NAME} -- graph titlezbx;triggerid:{TRIGGER.ID} -- define triggerid to link problem and recovery of eventzbx;priority:{TRIGGER.SEVERITY} -- set priority task like as priority of trigger from Zabbixzbx;ok:1 -- use this parameter only in RECOVERY message, if you don't want create a new task about recovery in Jira

You can use Jira format text in your actions: https://jira. /secure/WikiRendererHelpAction.jspa?section=all

Test script

You can use the following command to create a ticket in Jira from your command line:
python jirabix.py "jira_username" "ticket_subject" "ticket_desc" where

• jira_username - username from Jira user profile
• For ticket_subject and ticket_desc you may use "test" "test"
  
  
  • If you want to test real text from zabbix action message copy test/entry.txt from repo and change the contents of the file on your real data and change jirabix.py like this:
    
    And run:
    python jirabix.py "jira_username" "ticket_subject
    
    

Result

• See how creates the ticket with graf from Zabbix:
  
  

• When problem is going to OK, script convert the ticket to "Done" status with comment from zabbix recovery message:
  
  

原创：成小编